SECTION OP-38: ELECTRIC AILERON TRIM
Jump to navigation
Jump to search
Build Instruction Updates
- 09/29/16 RV-10-14_OP38.pdf
Check for more recent updates here
Hints
- "If you put it in the right wing, wiring is easier for EFIS systems having auto trim capabilities."
- Avoid spring chafing on pushrod, see this VAF thread.
- "you may need to bend the servo arm slightly to prevent the springs from dragging on the pushrod."
- "I attached the springs to the aileron pushrod brackets first. Then, I stretched the springs so that the ends that attach to the servo were together, securing them with a piece of safety wire. Once it was time to attach the servo to the springs, the ends were hooked to the servo arm and the safety wire was removed. It was just there to hold the springs together..."