SECTION 45: CABIN DOORS & TRANSPARENCIES: Difference between revisions
Jump to navigation
Jump to search
m (→45-06) |
|||
| Line 1: | Line 1: | ||
=== Build Instruction Updates === | === Build Instruction Updates === | ||
* | * 03/10/05 [https://www.vansaircraft.com/wp-content/uploads/2005/03/45_10.pdf 45_10.pdf] | ||
== 45-06 == | == 45-06 == | ||
Revision as of 05:45, 12 June 2022
Build Instruction Updates
- 03/10/05 45_10.pdf
45-06
- A group of builders are working on a hinge cover, see OnShape CAD project, check fit using this 1:1 print pdf file
45-08
- Silpruf Method
5-part instructional video
This method requires drilling holes along the edges of the windows. If your inside is in a finished state, this will cause patching / touch-ups after the window installation.
The video recommends 6 inch sanding discs which aren't readily available. 4 1/2” flap sander disks from Harbor Freight work as well.
45-19
- Windscreen base fairing lay-up
Windshield_to_Fuse_Transition_Steps.pdf